On stock

Baader Glasspathcorrector for binoviewers The corrector is more than just a simple barlow lens that compensates for part of the optical path of the binoviewer. First of all, the corrector corrects the color fringes created by the prisms of the binoviewer. Contrast and sharpness of the image increase. Calculation of the shortening factor: The corrector is installed directly in front of the binoviewer. If the corrector is moved further away from the binoviewer, the magnification effect and path compensation increase. ♦ GWK 1,25x: The optical path of the binoviewer is shortened by 18 mm. ♦ GWK 1,7x: The optical path of the binoviewer is shortened by 41 mm. ♦ GWK 2,6x: The optical path of the binoviewer is shortened by 84 mm. Adaptation to the telescope: Adaptation to the binoviewer is simple. The corrector is simply clamped between the T2 female thread and the T2 male thread. The adapter is automatically centered. For the connection to 1.25" or 2" we recommend suitable Baader adapters which are linked under the accessory recommendations. Further application possibilities: The correctors are not only suitable for the Baader Maxbright binoviewers. Also for other binoviewers or adapters, prisms ... the correctors can be used. Whenever you cannot reach the point of focus with a new accessory, the Baader Glass Path Corrector can be the saving solution.

Item condition: new and original packed

Baader Glaspath Corrector 1.7x for Mark V ZEISS Baader Binocular

Item condition: new and original packed

Baader Classic Ortho 18mm - 1,25" Okular

Item condition: new and original packed

*The illumination device offers a continously adjustable illumination of reticle eyepieces like the Baader MicroGuide, but also of older ones. It also fits into a few finder scopes. The connector, the M8x0.75 thread, is common with crosshair eyepiecesl so they often can be fitted with this device. The electrical supply works wireless with two button cells SR41/SG3, so there is no risk to get tangled up.

Item condition: new, but not original packed

Baader 1.25" Neutral Density Filter - Gray Filter ND3.0 - Attenuation 1000x

Item condition: new and original packed

Baader # 2456317 optical path corrector 1:2,6 for Baader Binocular

Item condition: new and original packed

B+W Schneider Kreuznach Top-Polfilter 2"

Item condition: new and original packed

B.I.G. Gimbal Tripod head for fast panning - up to 10 kg load capacity

Item condition: new, but not original packed

Eye lens for astro eyepiece Leitz F=30/88°

Item condition: new, but not original packed

Astrozap 12" RC Light Shroud

Item condition: new and original packed

Astronomik OIII-CCD-Filter, 12 nm, Anschluss 1,25"

Item condition: new, but not original packed

Astronomik CLS Filter 1,25"

Item condition: new and original packed